![]() ![]() Additionally, if the network supports multicast DNS (mDNS), the detector can be accessed by using the detector hostname. ![]() Detectors in the network can also be found by using the Medusa detector finder tool which can be downloaded from the Medusa Software section on the Medusa Insitute page under software downloades and updates. Most routers have the option to set an unique IP-address based on the connected device. If there is a router in the network that provides the detector with an IP-address, this address has to be determined by checking the router settings. when the detector is connected directly to a computer, the detector will initialise with its default IP-address. If no IP-address is provided by your router, e.g. The detector will check if it receives an IP-address from a router. The detector can be accessed either by directly connecting the detector to a computer of by connecting it to a network using a router. Accessing the mDOS interface through the built-in website 4.1. The PUCK has an input voltage range of 9-36V.Ĥ. The standard PUCK without a power pack is equipped with electronics to protect the whole system from over/under-voltage and reverse voltage. When using the spectrometer system in combination with additional external sensors by using the Medusa PUCK, the power management is provided by this external device. The MDC-401 cables and MDC-402 cables cables can be used in the voltage range 9-36V. The MDC-400 cables cables can be used in the voltage range 9-18V. Only power sources that can provide this power are suitable for powering the detector. ![]() During normal operation the detector will consume about 2.5W with a peak of power consumption of 6W. The provided cables have been fitted with additional electronics to protect the detector from over/under-voltage and reverse voltage. ![]() As stated on the technical information page the detector is powered with a voltage in the range 9-18V or 9-36V. The systems is based on the mMCA v2 electronics. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |